Typically, the part of the car that faces more risk of damage is the wheel. The wheels of your vehicle are the ones that touch the ground hence they can hit so many potholes, stones or other things that may be on the road. Once they are damaged, they put the brim at a higher risk of damage as well. Therefore, aluminum rim repair Orlando should be done immediately after damage so that the brim will not start rusting and lose its strength over time. More so, the brim can lose its integrity making the wheel to stop working altogether.
If you refurbish the brim in time, the wheels and fringe will be protected from further damage and the wheels will work for a longer time. Steps to do the refurbishing have been outlined, and you can follow them closely to ensure that your fringe is repaired well. The materials that you will need are aluminum polish, sandpaper, masking tape, liquid soap, water, old towel, sponge, clear lacquer and lastly, alloy paint.
The first thing that you are required to do is cleaning the damaged wheel using liquid soap and warm water. After cleaning it, you have to allow it to dry completely before you do the next step. Then, you soak the towel in paint thinner then rub it on the area of a wheel that is damaged. This will help in removing the old wax as well as road grime.
Using soap and water wash the car wheels to remove any excess thinning paint and leave the wheel for a few minutes to dry. Use masking tape to cover areas of your fringe that have not been damaged then sand the damaged area gently using sandpaper with a grit of 400.
After the part you are sanding starts forming some rough grooves, you should stop sanding and use bond putty to cover those parts. After the putty dries for some minutes, use 600-grit sandpaper to sand the putty you applied until it is smooth enough.
Then, cover the rest of your car wheel as well as tire using the masking tape to stop overspray when you are applying the paint and lacquer. Then, you will be required to apply thin layers of paint to cover the putty then leave it to get dry completely.
When you are sure that the paint is dry, you can now use the 1200-grit sandpaper to sand the refurbished part of the wheels until it is smooth. Then, clean the area with warm water and soap the spray clear lacquer after it dries. Leave it for a whole night so that the clear lacquer can completely dry before you undertake the next procedure.
Once the lacquer has dried completely, you can now remove the masking tape from the entire wheel and wash it. Apply the alloy polish using a soft and dry cloth. The polishing should be done to the whole wheel so that it blends and shines. Then, ensure you take care of the wheels so that you avoid damaging the brim again.
If you refurbish the brim in time, the wheels and fringe will be protected from further damage and the wheels will work for a longer time. Steps to do the refurbishing have been outlined, and you can follow them closely to ensure that your fringe is repaired well. The materials that you will need are aluminum polish, sandpaper, masking tape, liquid soap, water, old towel, sponge, clear lacquer and lastly, alloy paint.
The first thing that you are required to do is cleaning the damaged wheel using liquid soap and warm water. After cleaning it, you have to allow it to dry completely before you do the next step. Then, you soak the towel in paint thinner then rub it on the area of a wheel that is damaged. This will help in removing the old wax as well as road grime.
Using soap and water wash the car wheels to remove any excess thinning paint and leave the wheel for a few minutes to dry. Use masking tape to cover areas of your fringe that have not been damaged then sand the damaged area gently using sandpaper with a grit of 400.
After the part you are sanding starts forming some rough grooves, you should stop sanding and use bond putty to cover those parts. After the putty dries for some minutes, use 600-grit sandpaper to sand the putty you applied until it is smooth enough.
Then, cover the rest of your car wheel as well as tire using the masking tape to stop overspray when you are applying the paint and lacquer. Then, you will be required to apply thin layers of paint to cover the putty then leave it to get dry completely.
When you are sure that the paint is dry, you can now use the 1200-grit sandpaper to sand the refurbished part of the wheels until it is smooth. Then, clean the area with warm water and soap the spray clear lacquer after it dries. Leave it for a whole night so that the clear lacquer can completely dry before you undertake the next procedure.
Once the lacquer has dried completely, you can now remove the masking tape from the entire wheel and wash it. Apply the alloy polish using a soft and dry cloth. The polishing should be done to the whole wheel so that it blends and shines. Then, ensure you take care of the wheels so that you avoid damaging the brim again.
About the Author:
You can find details about the advantages you get when you use professional aluminum rim repair Orlando services at http://www.protechalloywheelsrepair.com today.
No comments:
Post a Comment